Tag: rondelles (Page 3 of 3)

FREE beading pattern for Rondelle Radiance Necklace

FREE beading pattern: Rondelle Radiance Necklace
FREE beading pattern: Rondelle Radiance Necklace

This is the last post in my “Rondell Radiance” series, where I challenged myself to design a matching bracelet, earrings, and necklace set using a single package of rondelle crystals of different sizes.

After the Rondelle Radiance Bracelet and Earrings from my last 2 posts, I had 17 8x10mm, 3 6x8mm, 15 4x6mm, and 4 3x4mm rondelle crystals left to work with.

This necklace design requires all of the 8x10mm and 4x6mm rondelles I had left, so the only left-over crystals after this challenge are three 6x8mm and four 3x4mm rondelles… not bad! This necklace also requires 11/0 and 8/0 seed beads plus a lobster clasp and two jump rings at both ends. This design makes a 17″ necklace, but can be extended by including more of diamond-shaped “chain” links at the beginning and end.

This necklace design is made in 2 rows, but even making it with only the first row looks nice too.

FREE beading pattern: Rondelle Radiance Necklace (one row only)
FREE beading pattern: Rondelle Radiance Necklace (one row only)

Since I did not make a bracelet for the bronze/cream piece, I had extra 3x4mm rondelles to include a variation on the first row of the necklace (using 16 3x4mm rondelles instead of the 8/0 seed beads).

FREE beading pattern: Rondelle Radiance Necklace (variation)
FREE beading pattern: Rondelle Radiance Necklace (variation)

Both variations look nice. I hope you enjoy this design series, and this free beading pattern!

Click on the photos below (or the free beading pattern) to zoom in.

If you wish to print the pattern, download it in PDF format:


If you enjoy the free designs, tutorials, and downloads provided by BeadDiagrams.com, consider donating using Paypal!

FREE beading pattern for Rondelle Radiance Earrings

FREE beading pattern: Rondelle Radiance Earrings
FREE beading pattern: Rondelle Radiance Earrings

This is the 2nd post in my “Rondelle Radiance” series, where I challenged myself to design a matching bracelet, earrings, and necklace set using a single package of rondelle crystals of different sizes.

After the Rondelle Radiance Bracelet from my last post, I had 23 8x10mm, 9 6x8mm, 19 4x6mm, and 14 3x4mm rondelles left to work with.

I wanted to utilize all four rondelle sizes for the earrings, so this is the design I came up with. Making both earrings requires six 8x10mm, six 6x8mm, four 4x6mm, and ten 3x4mm rondelles, plus 11/0 TOHO seed beads and two 8/0 seed beads to connect ear hooks via jump rings. I hope you enjoy this design series, and this free beading pattern. Stay tuned for another upcoming free pattern for the Rondelle Radiance Necklace!

Click on the photos below (or the free beading pattern) to zoom in.

If you wish to print the pattern, download it in PDF format:


If you enjoy the free designs, tutorials, and downloads provided by BeadDiagrams.com, consider donating using Paypal!

FREE beading pattern for Rondelle Radiance Bracelet

FREE Beading pattern: Rondelle Radiance Bracelet

This design series was inspired by a sale at Michaels on rondelle crystals, packaged in four 7-inch strands of different sized rondelles (8x10mm, 6x8mm, 4x6mm, and 3x4mm). I bought them in several different colors (purple shown here). The packages varied slightly in the number of beads for each size, but generally all packages had a minimum of 23 8x10mm, 29 6x8mm, 37 4x6mm, and 54 3x4mm rondelles.

I thought it would be fun to challenge myself to design a matching bracelet, earrings, and necklace set, using all the beads in the 4 strands (or nearly all). Here is a sneak peak of what I came up with.

FREE beading pattern: Rondelle Radiance matching set
FREE beading patterns: Rondelle Radiance matching set

I will post patterns as I finish diagraming them out, but I’ll start with the bracelet (which is my first cuff bracelet design). This bracelet was too wide to close with a traditional lobster clasp, so I tried a 31mm 5-loop slide lock bar clasp (connecting via 3 jump rings to the outer and middle loops). The connection points did not line up perfectly to the loops, but that was solved by using a smaller jump ring to connect to the middle loop, and slightly larger jump rings to connect to the outside loops.

This pattern requires 20 6x8mm, 18 4x6mm, and 40 3x4mm rondelles, plus 11/0 seed beads and six 8/0 seed beads for the jump rings to go through at either end. To finish, you will need a 31mm 5-loop slide lock bar clasp with 2 smaller jump rings (~3mm) and 4 larger jump rings (~6mm). (I created the 3mm jump rings from my 6mm jump rings by snipping about half off and using round nose pliers to close it smaller). This design is constructed with alternating “main” and “secondary” rows, starting and ending with the “main” row. 10 main and 9 secondary rows will make a 7-1/2″ bracelet when using larger/TOHO 11/0 seed beads (like the purple and gold piece). It will be slightly shorter if using smaller Czech 11/0 beads (like the copper/aqua piece, which came out to 7″). I made the light blue piece with 9 main rows and 8 secondary rows for my own smaller wrist, which ended up being also 7″ using TOHO 11/0 beads. You can add alternating rows for length, as long as you end with a “main” row. I hope you enjoy this design series, and this free beading pattern!

Click on the photos below (or the free beading pattern) to zoom in.

If you wish to print the pattern, download it in PDF format:


If you enjoy the free designs, tutorials, and downloads provided by BeadDiagrams.com, consider donating using Paypal!

FREE Beading Pattern for Rondelle Cross

This pendant pattern requires five 6x8mm rondelle crystals, 11/0 seed beads, and a bail or jump ring. You can use either larger TOHO 11/0 seed beads (like the gold/silver pieces) or smaller Czech 11/0 seed beads (like the black hematite pieces), but there is a slight difference noted in the pattern for each (in blue text, at steps 3 and 5). I used 6 lb Fireline, which seemed to work well to sufficiently “stiffen” the piece at the last step. There is also an “Earring Variation” included in the pattern that instructs how to modify the pattern to make a smaller version of the piece using 5x6mm rondelle crystals instead (still with 11/0 seed beads). An example of the earrings is shown with the light blue piece below. I hope you enjoy this free beading pattern!

FREE beading pattern: Rondelle Cross Pendant
FREE beading pattern: Rondelle Cross Pendant

For all pieces, I used faceted rondelle crystals from Michael’s. For the gold and silver pieces, I used Galvanized Permafinish TOHO 11/0 seed beads (aluminum and starlight) from Firemountain Gems. I like using these because they don’t tarnish over time. (A sample of the earring variation is shown in the light blue and silver piece below). For the black pieces, I used smaller Czech 11/0 seed beads.

Click on the photos below (or the free beading pattern) to zoom in.

If you wish to print the pattern, download it in PDF format:


If you enjoy the free designs, tutorials, and downloads provided by BeadDiagrams.com, consider donating using Paypal!

Newer posts »

© 2024 BeadDiagrams.com

Theme by Anders NorenUp ↑

Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.

Powered By
Best Wordpress Adblock Detecting Plugin | CHP Adblock