Tag: chips

FREE beading pattern: Chip Statement Necklace

FREE beading pattern: Chip Statement Necklace
FREE beading pattern: Chip Statement Necklace

Click on the photos below (or the free beading pattern) to zoom in.

The original inspiration for this piece was a sale at Hobby Lobby, specifically this Metal Gallery piece:

I thought this would be great as a focal point, with some natural stone. I have both drilled medium chips and round beads made of natural stone, so wanted to incorporate those somehow. I thought having the chips as a backdrop to the focal piece would be great, but they are too heavy to make an entire necklace out of with enough width for the focal piece to lay on top of. Plus I only had 30 inches or so of each chip variety. So what I finally came up with was more of a method than a pattern, which is easier to show with a mix of pictures and diagrams. Usually my PDF patterns are 1 page, but this one is 5 pages, to illustrate this method with images.

This pattern requires two 8/0 seed beads and jump rings for clasp, 11/0 seed beads, 4-mm round beads, 30-inches of medium drilled chip beads, and (optionally) a 1 1/2″ focal piece or bead (with 5 inches of 20-guage wire to attach).

I started by making 2 end pieces (each in an L-shape) to frame the center chip section (shown in steps 1 – 10 below).

Steps 1 – 10

Then I added some decorative stability strands (with accent color), so the end components would keep their shape with the weight of the chips added later. The first outer strand is made of alternating 4mm round beads and seed beads, and should measure 3″ – 3 1/16″ long, connecting from the last vertical diamond, to the 9th horizontal diamond from the right. This ended up being 13 round beads for the aqua/gold piece pictured below, but 14 for the blue/silver piece (as the size of 4mm beads can vary).

Step 11

Connect the strand at the 9th horizontal diamond from the right (see diagram below, step 12). After step 12, the 2nd strand should measure 2 1/4″, and connect from the 7th horizontal diamond from the right to the 4th vertical diamond. This ending up being 9 round beads for the aqua/gold piece pictured below, but 10 for the blue/silver piece. (I adjusted the strand to the right length by adding an extra seed bead on the end, which can be done with any of the strands).

Steps 12, 14, and 15
Step 13

When diamond links are at 90 degrees, the 3 longer strands will have some slack.

When you pull it apart past 90 degrees (as the gravity of the chip beads will do), the four strands should all be straight.

Next, string on 5 inches of chips.

Step 16

Connect it to the other end component, per diagram below:

Step 17

After connecting first row of chips, connect clasp with jump rings through 8/0 seed beads at either end, and place on a necklace display bust. (The weight of the chips can affect how long each of the next four chip strands will be, so it is good to finish the necklace while it is on the display bust).

Before step 18 (1st strand of chips)

As you add chip strands, ensure they are the right length so they lie close together without gaps or overlapping. (Step 18 indicates what these lengths were for my chips).

Step 18 (2nd strand of chips)
Step 18

After the 5th strand, the weight of the chips will pull the end component strands straight. This can be the finished necklace, or you can continue to add a focal piece on top of the chips.

Finished chip section (after step 18)

For the focal piece, first put about 5 inches of 20-guage wire through the focal bead, and bend the ends 90 degrees back on both sides.

Step 19

Put the necklace on the display bust backwards, then place the focal bead behind it. Be sure it is in the center.

Step 20

Bend the wires down with your thumbs, in between the chip beads. Use round nose pliers to curl the wire ends inward so they don’t poke out.

Step 21

Put the necklace back on the display bust frontward, showing the focal piece. Enjoy the finished piece!

Chip Statement Necklace

If you wish to print the pattern, download it in PDF format:


If you enjoy the free designs, tutorials, and downloads provided by BeadDiagrams.com, consider donating using Paypal!

FREE Beading Pattern for Chip Net Bracelet

The only materials required for this bracelet are 11/0 seed beads, small or medium drilled chips, and a lobster claw clasp.  I found it is good to use 2 colors of seed beads, one for the main bracelet netting, and one that is the same color as the chips (or clear).  In the green gold piece, I had a smaller lobster claw clasp, so I adjusted the pattern slightly to make the other end with a 6/0 bead in the middle to put a jump ring through for the lobster claw clasp to connect to.  I hope you enjoy this free beading pattern!

FREE beading pattern: Chip Net Bracelet

FREE beading pattern: Chip Net Bracelet

Click on the photos below (or the free beading pattern) to zoom in.

If you wish to print the pattern, download it in PDF format:

 

If you enjoy the free designs and downloads provided by BeadDiagrams.com, consider donating! (Just click the “Donate” button on the right sidebar to donate using PayPal).

FREE Beading Pattern for Chip Fringe Earrings

My apologies for erroneous e-mails sent from my website recently. I had been hacked.  I believe the problem is resolved, but there may be a few already-queued e-mails I couldn’t stop from going out before this post notification – kindly ignore those. On a more positive note, here is an earring design to coordinate with my previous Chip Fringe Necklace design.  This pattern also features beautiful bugle fringes with coraled ends, hanging off a superduo beaded chain connected into a small circle.  It was a bit tricky to convey this 3-D pattern in a 2-D diagram, but I tried my best – I hope it is clear enough to follow.  Below were the materials I used.  I hope you enjoy this free beading pattern!

FREE Beading Pattern: Chip Fringe Earrings

FREE Beading Pattern: Chip Fringe Earrings

11/0 seed beads 2.5 x 5mm Superduos Bugles Chips
Metalic dark gold TOHO
Dyna-Mites silver-lined transparent rainbow gold
Bronze Fire Red Czech Superduos 12mm gold Red/orange Adventurine (I think)
Dyna-Mites silver-lined transparent rainbow light aqua
TOHO black hematite
Black hematite Superduos #3 Twisted Light Blue Blue crackle-glass chip
Czech satin metallic bronze
Dyna-Mites Iris Green
Bronze aluminum Superduos #3 Iris green Dark green natural stone
Dyna-Mites Purple transparent rainbow
Dyna-Mites silver-lined transparent rainbow silver
Jet Metallic Suede Purple Superduos #3 Twisted Silver Amethyst

Click on the photos below (or the free beading pattern) to zoom in.

If you wish to print the pattern, download it in PDF format:

 

If you enjoy the free designs and downloads provided by BeadDiagrams.com, consider donating! (Just click the “Donate” button on the right sidebar to donate using PayPal).

© 2024 BeadDiagrams.com

Theme by Anders NorenUp ↑

Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.

Powered By
100% Free SEO Tools - Tool Kits PRO