FREE beading pattern for Bugle Deco Necklace

This design is a geometric V-shaped necklace using Czech #3 (6.4mm) bugle beads and 11/0 seed beads.  It is pictured below with the Bugle Deco Earrings pattern from my previous post as the pendant, but really could be used with any pendant.  As always, when working with bugle beads, I recommend using Fireline to keep the sharp edges of the bugle beads from severing the thread.  When making the pendant for this necklace, I substituted the 6/0-8/0 bead at the top with a regular 11/0 seed bead, since no jump ring has to go through it to attach to the necklace.  I hope you enjoy this free beading pattern!

FREE beading pattern: Bugle Deco Necklace

FREE beading pattern: Bugle Deco Necklace

Zoom/Print Instructions:

Note:If you are viewing this post from an e-mail, open the post in a browser first (i.e. click on the post title) to follow these steps.

Click on the photos below (or the free beading pattern) to zoom in.  If you wish to print the pattern, follow these steps:

  1. Click on the beading pattern thumbnail to zoom in.
  2. Click on the icon that looks like a square with an arrow to open the image in its original size.
  3. Print that image from your browser (or save the image and print it from another program).

Note: In Internet Explorer, you can use “Print Preview” to adjust orientation and scale to fit on a single page (landscape orientation, with whatever % scale allows it to fill one full page).  In Safari, orientation and scale can be adjusted on Print dialog via “Show Details” (landscape orientation, with whatever % scale allows it to fill one full page). 

Facebooktwittergoogle_pluspinterest

FREE beading pattern for Bugle Deco Earrings

The geometric angles in this design give it an Art Deco feel from the Roaring Twenties.  These earrings are fairly quick to make, and require round beads or crystals (4mm, 6mm, and 8mm), Czech #3 (6.4mm) bugle beads, 11/0 seed beads, plus an 8/0 or 6/0 bead at the top to put a jump ring through.  This design works equally well with smaller Czech11/0 seed beads (like the orange/gold and aqua/silver examples) or larger TOHO 11/0 seed beads (like the red/bronze and silver/clear examples).  Using the larger TOHO beads result in a slightly more elongated shape.  The last few photos show the pattern works equally well as a pendant to accompany the earrings.  I hope you enjoy this free beading pattern!

FREE beading pattern: Bugle Deco Earrings

FREE beading pattern: Bugle Deco Earrings

Zoom/Print Instructions:

Note:If you are viewing this post from an e-mail, open the post in a browser first (i.e. click on the post title) to follow these steps.

Click on the photos below (or the free beading pattern) to zoom in.  If you wish to print the pattern, follow these steps:

  1. Click on the beading pattern thumbnail to zoom in.
  2. Click on the icon that looks like a square with an arrow to open the image in its original size.
  3. Print that image from your browser (or save the image and print it from another program).

Note: In Internet Explorer, you can use “Print Preview” to adjust orientation and scale to fit on a single page (landscape orientation, with whatever % scale allows it to fill one full page).  In Safari, orientation and scale can be adjusted on Print dialog via “Show Details” (landscape orientation, with whatever % scale allows it to fill one full page). 

Facebooktwittergoogle_pluspinterest

FREE beading pattern for Bugle Diamond Earrings

Here is a pattern for earrings to match necklaces from my last two posts (Bugle Squares and Bugle Diamonds).  They require the same beads as the Bugle Diamonds necklace (Czech #3 bugle beads, 4mm crystals, and one or two colors of seed beads) plus two 6/0 seed beads and jump rings to connect the components to ear hooks or clips.  It is highly recommended that you use Fireline for this pattern, otherwise the sharp edges of the bugle beads could sever your thread.The green and gold earrings were made using Czech #3 rainbow dark green bugle beads, dark green 4mm round crystals, with light green rainbow and gold lined seed beads.  The grey earrings were made using Czech #3 (6.4mm) rainbow grey bugle beads, 4mm fire polished lilac luster round crystals, and light blue rainbow and light purple rainbow silver lined seed beads.

FREE beading pattern: Bugle Diamond Earrings

FREE beading pattern: Bugle Diamond Earrings

Zoom/Print Instructions:

Note:If you are viewing this post from an e-mail, open the post in a browser first (i.e. click on the post title) to follow these steps.

Click on the photos below (or the free beading pattern) to zoom in.  If you wish to print the pattern, follow these steps:

  1. Click on the beading pattern thumbnail to zoom in.
  2. Click on the icon that looks like a square with an arrow to open the image in its original size.
  3. Print that image from your browser (or save the image and print it from another program).

Note: In Internet Explorer, you can use “Print Preview” to adjust orientation and scale to fit on a single page (landscape orientation, with whatever % scale allows it to fill one full page).  In Safari, orientation and scale can be adjusted on Print dialog via “Show Details” (landscape orientation, with whatever % scale allows it to fill one full page). 

Facebooktwittergoogle_pluspinterest

FREE beading pattern for necklace Bugle Diamonds

I experimented more with the bugle square-within-square component from my last post (Bugle Squares), and came up with another design I like very much.  This pattern results in a more rigid curve in the necklace than the design in my last post, so works best as a shorter necklace (13 to 15 components).  It is highly recommended that you use Fireline for this pattern, otherwise the sharp edges of the bugle beads could sever your thread.  I vertically attached 3 more components to the front of the green and gold necklace, to give it a more V-line in the front, which I thought was a nice embellishment to the pattern.  The green and gold piece was made using Czech #3 (6.4mm) rainbow dark green bugle beads, dark green 4mm round crystals, with light green rainbow and gold lined seed beads.  The grey piece was made using Czech #3 rainbow grey bugle beads, 4mm fire polished lilac luster round crystals, and light blue rainbow and light purple rainbow silver lined seed beads.  Enjoy!

FREE beading pattern: Bugle Diamonds

FREE beading pattern: Bugle Diamonds

Zoom/Print Instructions:

Note:If you are viewing this post from an e-mail, open the post in a browser first (i.e. click on the post title) to follow these steps.

Click on the photos below (or the free beading pattern) to zoom in.  If you wish to print the pattern, follow these steps:

  1. Click on the beading pattern thumbnail to zoom in.
  2. Click on the icon that looks like a square with an arrow to open the image in its original size.
  3. Print that image from your browser (or save the image and print it from another program).

Note: In Internet Explorer, you can use “Print Preview” to adjust orientation and scale to fit on a single page (landscape orientation, with whatever % scale allows it to fill one full page).  In Safari, orientation and scale can be adjusted on Print dialog via “Show Details” (landscape orientation, with whatever % scale allows it to fill one full page). 

Facebooktwittergoogle_pluspinterest

FREE beading pattern for necklace Bugle Squares

This stringed sequence of squares within squares makes for a lovely geometric necklace design. The pattern requires Czech #3 bugle beads (6.4mm), 11/0 seed beads, and 6x4mm rondelle crystals (or other similar accent bead).  It is highly recommended that you use Fireline for this pattern, otherwise the sharp edges of the bugle beads could sever your thread.  This piece was made using Czech #3 rainbow dark topaz brown (orange) bugle beads, light rainbow pink silver lined 11/0 seed beads, and light peach 6x4mm rondelle crystals.

FREE beading pattern: Bugle Squares

FREE beading pattern: Bugle Squares

Zoom/Print Instructions:

Note:If you are viewing this post from an e-mail, open the post in a browser first (i.e. click on the post title) to follow these steps.

Click on the photos below (or the free beading pattern) to zoom in.  If you wish to print the pattern, follow these steps:

  1. Click on the beading pattern thumbnail to zoom in.
  2. Click on the icon that looks like a square with an arrow to open the image in its original size.
  3. Print that image from your browser (or save the image and print it from another program).

Note: In Internet Explorer, you can use “Print Preview” to adjust orientation and scale to fit on a single page (landscape orientation, with whatever % scale allows it to fill one full page).  In Safari, orientation and scale can be adjusted on Print dialog via “Show Details” (landscape orientation, with whatever % scale allows it to fill one full page). 

Facebooktwittergoogle_pluspinterest