FREE beading pattern for Trinity Necklace

This design is all about groups of three, which inspired its title.  This pattern requires 6mm and 4mm round beads or pearls, 6mm bicone crystals, and 1 or 2 colors of 11/0 seed beads.  Smaller Czech 11/0 seed beads work just as well as larger TOHO 11/0 seed beads do with this design.  Using the larger seed beads results in slightly larger triangle components.  This difference can be seen in both close-up images, which show the smaller seed bead components above the larger seed bead components for comparison.  I hope you enjoy this free beading pattern!

FREE beading pattern: Trinity Necklace

FREE beading pattern: Trinity Necklace

Zoom/Print Instructions:

Note:If you are viewing this post from an e-mail, open the post in a browser first (i.e. click on the post title) to follow these steps.

Click on the photos below (or the free beading pattern) to zoom in.  If you wish to print the pattern, follow these steps:

  1. Click on the beading pattern thumbnail to zoom in.
  2. Click on the icon that looks like a square with an arrow to open the image in its original size.
  3. Print that image from your browser (or save the image and print it from another program).

Note: In Internet Explorer, you can use “Print Preview” to adjust orientation and scale to fit on a single page (landscape orientation, with whatever % scale allows it to fill one full page).  In Safari, orientation and scale can be adjusted on Print dialog via “Show Details” (landscape orientation, with whatever % scale allows it to fill one full page).

Facebooktwittergoogle_pluspinterest

FREE beading pattern for Framed Crystal Drop Earrings

Here is a pattern for some earrings to match the Framed Crystal Drops necklace from my last post.  It requires the same beads, plus 8/0 seed beads for the jump ring to connect to at the top.  Use the jump ring to connect to either clip or pierced ear hook.  The earrings below were made with gold matte superduo beads, bronze TOHO 11/0 and 15/0 seed beads, and peach rose Swarovski crystals (4mm and 6mm). I hope you enjoy this free beading pattern!

FREE beading pattern: Framed Crystal Drop Earrings

FREE beading pattern: Framed Crystal Drop Earrings

Zoom/Print Instructions:

Note:If you are viewing this post from an e-mail, open the post in a browser first (i.e. click on the post title) to follow these steps.

Click on the photos below (or the free beading pattern) to zoom in.  If you wish to print the pattern, follow these steps:

  1. Click on the beading pattern thumbnail to zoom in.
  2. Click on the icon that looks like a square with an arrow to open the image in its original size.
  3. Print that image from your browser (or save the image and print it from another program).

Note: In Internet Explorer, you can use “Print Preview” to adjust orientation and scale to fit on a single page (landscape orientation, with whatever % scale allows it to fill one full page).  In Safari, orientation and scale can be adjusted on Print dialog via “Show Details” (landscape orientation, with whatever % scale allows it to fill one full page). 

Facebooktwittergoogle_pluspinterest

FREE beading pattern for Framed Crystal Drops necklace

This design is very similar to the Framed Pearl Drops necklace from my previous post, but modified to use bicone crystals instead of pearls.  I found that simply substituting bicone crystals instead of pearls didn’t work, as the crystal’s middle edge would make the superduo bead directly below it slant one way or another instead of being straight and vertical.  So I modified the pattern to fit the crystals better, and also created a point on the crystal drops, to accentuate their non-round shape.  Required materials are 4mm and 6mm crystals, 11/0 and 15/0 TOHO seed beads, and Superduo beads.  The piece below was made with gold matte superduo beads, bronze TOHO 11/0 and 15/0 seed beads, and peach rose Swarovski crystals (4mm and 6mm).  I hope you enjoy this free beading pattern!

FREE beading pattern: Framed Crystal Drops

FREE beading pattern: Framed Crystal Drops

Zoom/Print Instructions:

Note:If you are viewing this post from an e-mail, open the post in a browser first (i.e. click on the post title) to follow these steps.

Click on the photos below (or the free beading pattern) to zoom in.  If you wish to print the pattern, follow these steps:

  1. Click on the beading pattern thumbnail to zoom in.
  2. Click on the icon that looks like a square with an arrow to open the image in its original size.
  3. Print that image from your browser (or save the image and print it from another program).

Note: In Internet Explorer, you can use “Print Preview” to adjust orientation and scale to fit on a single page (landscape orientation, with whatever % scale allows it to fill one full page).  In Safari, orientation and scale can be adjusted on Print dialog via “Show Details” (landscape orientation, with whatever % scale allows it to fill one full page). 

Facebooktwittergoogle_pluspinterest

FREE beading pattern for Royal Lace Earrings

Here is a pattern for earrings that match the Royal Lace necklace from my last post.  This design is basically composed of the same 2 components as the necklace (the 3-pearl component, and the diamond-shaped crystal component), but they are arranged vertically instead of horizontally.  This pattern is made using Czech 11/0 seed beads, 4mm bicone crystals, and 4mm and 6mm pearls.  Enjoy!

FREE beading pattern: Royal Lace Earrings

FREE beading pattern: Royal Lace Earrings

Zoom/Print Instructions:

Note:If you are viewing this post from an e-mail, open the post in a browser first (i.e. click on the post title) to follow these steps.

Click on the photos below (or the free beading pattern) to zoom in.  If you wish to print the pattern, follow these steps:

  1. Click on the beading pattern thumbnail to zoom in.
  2. Click on the icon that looks like a square with an arrow to open the image in its original size.
  3. Print that image from your browser (or save the image and print it from another program).

Note: In Internet Explorer, you can use “Print Preview” to adjust orientation and scale to fit on a single page (landscape orientation, with whatever % scale allows it to fill one full page).  In Safari, orientation and scale can be adjusted on Print dialog via “Show Details” (landscape orientation, with whatever % scale allows it to fill one full page). 

Facebooktwittergoogle_pluspinterest

FREE beading pattern for Royal Lace necklace

This pattern definitely takes some patience to make, but the end result is lovely.  To make it, you need 11/0 Czech seed beads, 4mm crystals, and 4mm and 6mm pearls.  The piece below was made using AB sapphire 4mm crystals, ivory pearls, and silver 11/0 Czech seed beads.  The other example was made with copper seed beads, metallic copper crystals, and beige pearls.  I plan to include a pattern for matching earrings in my next post.  Enjoy!

FREE beading pattern: Royal Lace

FREE beading pattern: Royal Lace

Zoom/Print Instructions:

Note: If you are viewing this post from an e-mail, open the post in a browser first (i.e. click on the post title) to follow these steps.

Click on the photos below (or the free beading pattern) to zoom in.  If you wish to print the pattern, follow these steps:

  1. Click on the beading pattern thumbnail to zoom in.
  2. Click on the icon that looks like a square with an arrow to open the image in its original size.
  3. Print that image from your browser (or save the image and print it from another program).

Note: In Internet Explorer, you can use “Print Preview” to adjust orientation and scale to fit on a single page (landscape orientation, with whatever % scale allows it to fill one full page).  In Safari, orientation and scale can be adjusted on Print dialog via “Show Details” (landscape orientation, with whatever % scale allows it to fill one full page). 

Facebooktwittergoogle_pluspinterest