Month: November 2016

DIY Sweater Clip in 3 Easy Steps

This is a bit different from previous posts, as this beading project utilizes pliers and glue instead of needle and thread.  I have been on the look-out for a nice sweater clip for my open-front sweaters (or even a cape clip or dress clip I can use as a sweater clip).  I prefer the clips to be close together to cinch in at the waist, but most of the clips I’ve found are too far apart for that.  So I found a way to make my own, and I absolutely love them!  They hold thick or thin sweaters without snagging, and can be created with casual or formal looks.  The materials are inexpensive, and these sweater clips make great Christmas gifts.  I hope you enjoy this project!

DIY Sweater Clip

DIY Sweater Clip Using Double-Link Beads

DIY Sweater Clip

Sweater Clips


Materials

  • 2 large flat-back beads (can be single-link, double-link, or single-hole flat beads)
  • 2 clip-on earring backs
  • jewelry or metal glue
  • jump rings and pliers
  • chain (optional)
DIY Sweater Clip Materials

DIY Sweater Clip Materials

Step 1:

Glue the earring clips to the back of the beads.  For single-link or single-hole beads, earring clip should point towards the link or hole.  For double-link beads, earring clip should point in between the links.

DIY Sweater Clip - Step 1

DIY Sweater Clip – Step 1

Step 2:

Bend the ends of the earring clips 90-degrees in.  This allows the clip to grab and not slip off the sweater, and to hold without snagging.

DIY Sweater Clip - Step 2

DIY Sweater Clip – Step 2

For greater grip, you can snip out a small section at the end of the clip to create two teeth, using wire cutters:

DIY Sweater Clip: step 2b

DIY Sweater Clip: Step 2b

Step 3:

Connect the two beads using jump rings and chains, with the clips facing outwards.  If using single-hole flat beads, connect them with a wire first (with a loop at each end), then add a chain via jump rings.

DIY Sweater Clip - Step 3a

DIY Sweater Clip – Step 3a

DIY Sweater Clip - Step 3b

DIY Sweater Clip – Step 3b

More Examples:

DIY Sweater Clip

Sweater Clip Using Single-Hole Beads

DIY Sweater Clip

Sweater Clip Using Link Beads

FREE beading pattern for Twin Flanked Drop Earrings

Here is a simple earring pattern to coordinate with the Twin Flanked Drops necklace design from a previous post.  Materials required are the same as the necklace, plus a couple of 6/0 or 8/0 seed beads and jump rings for connecting the earring to an earring hook or clip. (Refer to my Twin Flanked Drops necklace post for the list of beads used in these two color schemes).  I hope you enjoy this free beading pattern!

FREE beading pattern: Twin Flanked Drop Earrings

FREE beading pattern: Twin Flanked Drop Earrings

Click on the photos below (or the free beading pattern) to zoom in. 


If you wish to print the pattern, download it in PDF format:

 

If you enjoy the free designs and downloads provided by BeadDiagrams.com, consider donating! (Just click the “Donate” button on the right sidebar to donate using PayPal).

FREE beading pattern for Christmas Tree Earrings

Even though it is not yet Thanksgiving, I was thinking ahead toward the holidays and wanted to make some 3-D Christmas Tree earrings using twin beads.  I figured if I searched online I might find a pattern or at least an idea for its construction.  To my surprise, after an exhaustive search, I didn’t find anything like what I had in mind.  What I did find was either 2-D, not made from twin beads, or too large for my taste to be an earring.  So I decided to work out a pattern for a small twin-bead 3-D Christmas Tree myself and share it with you all!  The secret to stabilizing the tiers of the tree so that  they don’t shift off-center is the “hidden” bicone crystal placed between the middle and bottom tiers.  The shape of that crystal helps both tiers remain centered around the post, while being only about 5% visible.  I was so happy with how the first pair turned out, I immediately experimented with other color combinations.  I found the pattern worked with either twin beads (like the gold and green examples) or Superduo beads (like the silver and dark blue examples). The Superduo beads seemed to make a slightly “fatter” tree, as the tiers had a little shallower bowl shape than the twin beads.  The last pair I made were the gold trees, where I decided to make a wrapped loop instead of just a simple loop on the last step.  That worked really well to hold the pieces more tightly on the post, and in hindsight, I probably would have done all of them like that.  I hope you enjoy this free beading pattern!

FREE beading pattern: Christmas Tree Earrings

FREE beading pattern: Christmas Tree Earrings

Materials used:

  • Light Green twin beads, transparent rainbow 11/0 seed beads, 4mm green bicone crystals (hidden), 4mm red bicone crystals for the top, and 4mm silver round druk beads for the trunks
  • Silver Superduo beads, red and green silver-lined 11/0 seed beads, 4mm green bicone crystals (hidden), 4mm round lime green metallic crystals for the top, and silver round druk beads for the trunks.
  • Iris Blue Superduo beads, gold and silver 11/0 seed beads (silver-lined), 4mm green bicone crystals (hidden), 4mm gold bicone crystals for the top, and 4mm gold pearls for the trunks.
  • Gold twin beads, silver and aqua 11/0 seed beads (silver-lined), 4mm green bicone crystals (hidden), 4mm teal AB bicone crystals for the top, and 4mm gold pearls for the trunks.

Zoom/Print Instructions:

Click on the photos below (or the free beading pattern) to zoom in. 


If you wish to print the pattern, download it in PDF format:

 

If you enjoy the free designs and downloads provided by BeadDiagrams.com, consider donating! (Just click the “Donate” button on the right sidebar to donate using PayPal).

© 2024 BeadDiagrams.com

Theme by Anders NorenUp ↑

Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.

Powered By
Best Wordpress Adblock Detecting Plugin | CHP Adblock